Alpacas off Devil's Backbone

 

_________12._____ Alpacas off Devil’s Backbone

 

Here in Central Texas the land has some extremes in canyons that are as dramatic as any part of the so-called Hill Country.  Especially dramatic is the terrain along RR 32 as it travels west on a ridge separating the Wimberley Valley from canyons to the south. This is probably the most well-known mile or so of  RR 32 as it snakes in several ess curves along what is known as Devil’s Backbone.  It’s here in the canyon to the south of RR 32 that we found Tierra Prometeda, with terrain that probably has some attraction to alpacas.  Of course, its hotter than the mountains of Peru, but this herd of some 100 animals like it because for the most part, they were all born here in Texas, plus they like the care they get from their owners Rhonda and Kern Deschner.

We became aware of this alpaca herd some two years ago when we stopped at a metal working fair located off Dreibrodt Road some twenty miles south in Guadalupe County.  At this show, Rhonda and her Farm Manager, Jenny, were showing three of the animals that were raised on the ranch off Devil's Backbone. It was first time that we were able to come within mere inches of these fine animals.

The alpaca is a member of the camelid family.  Scientists have determined that camels as we know them today, once existed in South America, and the alpaca, the vicuna and the guanaco are descendants of the camel.  The alpaca is no longer found in the wild in Peru because it is now a domesticated animal, but the vicuna is wild and remains so today.  The llama is domesticated but the llama is larger than the alpaca, does not have the quality of fleece and is used mainly as a worker, carrying loads for resident farmers.

Peru is the  native land where these animals and especially the alpaca  have been domesticated for more than 2000 years, but even so, they have not lost their native instincts, one of which is caring for their young. 

 

We started our visit in the mother and newborn’s corral with Jenny and met Princess Leia and her son Mandalorian, both named after Star Wars characters.  Usually the mothers birth their babies in December but Princes Leia was early by a month so this pair were alone in the corral and Mandalorian will have to wait for his peers to frolic with.

Figure 12.1-Week-old alpaca and mother

 Jenny showed us how she, but probably not we, could pick up the newly born alpaca and the mother would allow her to do so because it had occurred several times before and now Princess Leia trusted her. Despite this trust, it was apparent that she showed some signs of distress by moving closer to the newborn.  But then something interesting began to happen.  As Jenny held the small alpaca in her arms and stood by the mother, all seemed normal and calm. At this time, we were standing about ten feet away from Jenny with newly named Mandalorian and off to the side was mother alpaca.  Slowly, Jenny started to move toward us to allow us to touch the newborn, and Princess Leia also started to move, regally holding her head high and with an intense look in her eyes, all of this occurred as if in slow motion.  With Jenny nearing us, the mother alpaca slowly eased her way broadside in between us and Jenny , and here is another interesting aspect of this occurrence.  Mother alpaca was humming a continuous monotone that we were told is one of the ways they communicate concern.  All the while this was unfolding, Princess Leia made no rapid movements, kept her head high and kept her eyes on us and her new baby.  The end effect was that mother alpaca separated us from her newborn because she was unsure of the safety since we were newcomers to the scene.

We then went off to another corral where several young alpacas were gathered.  When the alpacas in this herd discovered that we were strangers, their attention shifted to us as if to say, "who are these visitors?" With just a bit of encouragement from Jenny, they slowly made their way to us and became quite friendly, one even being curious about the leather wallet I had in my back pocket.  With no hesitation, they allowed us to rub their necks as if we were their long-lost pals. While R was busy fending off the pickpocket, I was making friends with chubby-cheeked Fiorello and a couple of his buddies.

 

Figure 12.2 Young curious alpacas

 One aspect of the hill country terrain that the animals must like is to be able to roll in the dust, so they have been provided with special spots to roll around in some dirt bowls of dusty limestone and sand just as most of us have seen horses do with this same need to clean their coats.

 

Figure 12.3 Rolling in the dirt

 We talked at length with Rhonda about the business of fleece and animal production.   There is little doubt that animal sales produce the most income, with fleece sales being second. But the details of  fleece preparation was of interest to us because we were able to feel the fleece, see it in the products made from it and experience the wide range of fleece attributes that exist from one animal to another.

Shearing, as was noted before, is done in the first week of every April when the shearer arrives.  The fibers are matted, so the shearing operation produces a batch of fleece that represents one animal.  Here, Rhonda is demonstrating a pelt of fleece taken from the back of one animal. The fibers are about two inches long and zig-zagged with a diameter ranging from 10 to 20 microns.

 

Figure 12.4 Alpaca fleece mat

We were curious about the structure of the individual fibers that made up the mat and so Rhonda plucked a small sample of fiber from the mat and spread it out on the back of Jenny’s shirt, the only contrasting background we could find close by.  The overall length of the fibers in this photo is about 2 inches.

                                                            Figure 12.5 detail of fibers

 The mats are sold to mills that have strict grading standards that affect the price.   The fibers dye easily and thus provide opportunity for making into yarn which then can be made into clothing, rugs and whatever.

 

Figure 12.6   Grading of Alpaca fleece

The fiber grading chart is from Texas Hand Woven Creations doing business as Ingrid’s Custom Hand Woven, Inc., in Paint Rock, Texas and can be found on other websites like New England Alpaca Fiber Pool. Fiber grading is based on five factors;  fineness, amount of guard hair, variation in diameter of fibers, fiber length, and uniformity of fiber diameter.  The alpaca fleece is cleaned of manure and other organic matter such as grass and twigs, then sent to the processor for grading.

 The company in Paint Rock employs 8-12 who process fleeces, making yarn and weaving in an operation that is housed in three stone buildings that are each over 100 years old. In 2009 focus shifted from wool/mohair to alpaca, llama, and buffalo fibers plus some other natural fibers making rugs, placemats, floor and table runners, wall hangings and saddle pads.

 

Next, we advanced to the Farm Store, part of Tierra Prometida,  that is available for shopping; but since the shop has no regular hours, an appointment is a necessity.  This very compact and well-organized shop has a wide range of articles made of alpaca fleece, some of which are made in places like Peru, and some in the USA.  Here is a photo of an alpaca accent rug made by the weavers of Texas Handwoven Creations in Paint Rock, Texas.  All the colors of this 2’ by 3’ rug are natural colors.

 

Figure 12.7  Handwoven alpaca fleece rug

 

Rhonda makes some of the clothing items herself and there are cloud-soft afghans, scarves, stoles, knitted Peruvian caps and stockings as well toys.  The shop is a little Alladin’s cave of beautiful handmade delights that are hard to resist.  After mulling over the possibilities, we returned a few weeks later for the 2’x3’ rug above (to be used as a wall hanging) and a toy alpaca that will sport a red ribbon for Christmas.

 

 

_____Sightings_____

                                

           Figure 12.7  Roadrunner on porch rail

Figure 12.8  Littleleaf sumac  ( Rhus microphylla )

 

     

Figure 12.9  Crape myrtle  ( Lagerstroemia indica ) and Shumard oak ( Quercus shumardii )

A showing of our fall colors, blowing in the November wind.

 

The Elegant Bobwhite

 They arrived, they stayed awhile and then they left.

 Bobwhites, one of our favorite birds because of their flight characteristics and especially their call, have not been heard this year on the ranch.

All North American bobwhites (Corvus Virginiana) are catalogued in 23 subspecies and these subspecies are divided into 4 groups.  Three of the four groups (Masked, Grayson’s, and Black Breasted) live in central and south America and the fourth group , the one to which our local bird belongs is the Eastern Group.  In Texas, of the 23 subspecies, we have two different bobwhites, the  subspecies Texanus and the Taylori.  It takes an expert to tell all these subspecies apart as they are so similar in appearance.

Bobwhite, male and two females

The Texanus sub specie is our local bird, its range is from Central Texas south well into Mexico. The Taylori sub specie ranges from Central Texas up into the central plains of the states to the north.

The bobwhite has several habits which are unique.  They are insect and seed eaters, they group into coveys, they tend to be monogamous, and they fly with a wild beat of the wings when flushed from their roosts producing a sound that is memorable only second to the sound of a rattlesnake.

They roost on the ground, where they form a circle of birds all facing outward from the center of the circle and thus give the impression when flushed, that they all fly in different directions and for the first instant they do because of this roosting arrangement. They do this for protection as they have several natural enemies---like hawks, owls, coyotes and of course hunters.

Ranchers in Texas, particularly in the high plains and in south Texas find that leasing their land to hunting quail brings in more profit than running cattle on the same land----that’s not easy to pin down as it may be the difference between two low numbers.   Nevertheless, hunting bobwhite in Texas is a big thing and brings in a lot of associated revenue and taxes.

Bobwhites nest in the springtime and find the best spot to nest at the base of a clump of a typical Texas bunch grass, where the top of the bunch grass may be 18 to 20 inches tall providing seclusion and some shade at parts of the day.  Heavy underbrush is not their favorite habitat, grassland with some scattered brush is their preferred habitat.

The Bobwhite has been the focus of research for the last 80 years, probably due to the importance as a game bird and  a bird that could be raised for food. Squab farms are common, especially in the northern states. 

In the 1940s, researchers found that Vitamin A is an important component in the food they eat, and the source of Vitamin A for the Bobwhite is green vegetation.  Typically, 70 % of the food for a bobwhite is seed, but during breeding season, that changes to include more insects, and green vegetation to achieve their Vitamin A requirements.  In turn, Vitamin A was found to be critical to egg production and the overall health of the bird.  Low Vitamin A could lead to short life span but in most cases, the bird succumbed to predators because low Vitamin A caused low energy, poor eyesight, and a general inability to escape predation. Related to this dietary study was that landowners attempt to supply food for the bobwhite to augment natural foods had little effect on the population of the species.  Almost all the programs to help the bobwhite produced little positive results.  They apparently know the difference between natural food and artificial food.

In the 1970s, studies were conducted on the need for caloric intake at different ambient temperatures; this study found that egg production was peaked at temperatures between 70 and 77 degrees F.  Out of this study came the bonus information that showed that Bobwhites can tolerate heat, but just so much heat.  For females, that temperature is about 107 degrees F, males a few degrees higher.  Sustained temperatures above these levels and the birds succomb.

In our area, high temperatures usually mean low water levels in the soil—whatever rain we may get in the hot weather months evaporates quickly.  Bobwhites and for that matter, all the members of the quail family are known for their wild fluctuations in population correlating with rainfall. An intuitive conclusion is that high rainfall means more green vegetation as food (Vitamin A) and lower temperatures, both of which favor reproduction.

Populations of bobwhite appear to be decreasing by about 2-3 % per year from the best estimated of bird counts and harvest counts from hunting.  This decline in population has been linked to several factors, some old natural ones and some newly discovered. 

Regarding the established factors affecting population, all the known predators factor into the equation, but skunks and fire ants may be at the top of that list.  Raccoons follow as a distant third.

But there are new concerns for the health of the bobwhites; not new but seemingly found more often in recent years.  There is a parasite that is picked up by the bobwhite from eating grasshoppers.  Due to the heat and the drought, our grasshopper population has burgeoned this last year and again this year.  The parasite that is picked up is a thread worm that escapes from the bird crop and migrates to the nasal passages and eventually into the eyes.  These thread worms have been known to biologists for decades, but it appears that the infestation has grown to epidemic status in some parts of Texas.  The thread worms are destructive, destroying vision long before it kills the bird.  Hunters have reported birds that fly into obstacles upon being flushed and even birds with open eye sockets.  A medicine has been developed for adding to food supplies, but the problem is getting the birds to eat the medicated food.  The outlook for this problem is not good.

 Nest success is another problem with Bobwhites.  During average conditions of temperature and water availability, the success of the nest ranges around 28 % in most studies.  The nest sizes are large though, offsetting this low nest success level.  About 12 eggs are the normal nest size, so when the nest is successful, there are many baby quail.  Studies show that the skunk is the most probable cause of nest destruction.

If seeds are the main food for the bobwhite, what seeds are preferred?  Analysis of crops from birds across Texas show that their diet consists of a lot of different grass seeds, but there are some that are obviously preferred.   Here are a few:  Sorghum, both the naturalized plants  and those  planted for food production are a favorite of the bobwhite.  Among the grasses, such as the rescue grass, the paspalum and those grasses with seed heads like sorghum are favorites of the bobwhite.

From  all these studies of natural foods for the bobwhite, the data show that most of the favorite foods grow most predominantly in the eastern part of the state or the southern part of the state, leaving the hill country short of natural food for the bobwhite.

So, what about our brief encounter with the bobwhites?  The intuitive conclusion is that they did not find enough food and their time here was during those years when we had slightly higher than normal summer temperatures and lower rainfall.  Whether they died off or migrated to other areas is not known, but it could be presumed they did not reproduce well and the died out.

All this reminds me of my younger days of hunting ring-necked pheasants on my uncles farm in Hudsonville, Michigan.  The whole area was farming country then and most farms planted corn both for the corn and the corn plant.  The corn was saved for the chickens, and the corn plant, while still green was chopped up and put into silos for the winter feed of the cows.  But while the corn was still in the field, the pheasants not only ate the corn, but they found it easy to run down the corn rows to hide from whatever came along.  Every 20 acre field had several cock pheasants.  Then, progress came to the area and the farmers disappeared and so did the corn and so did the pheasants. It would be a challenge to find one pheasant there today.

All this shows that wild animals, and plants for that matter, live where they can thrive, and when those conditions turn negative, they leave or die.

Useful of Plants

 Plants can have all sorts of uses;  for ornamental value, a direct food for us or a food in the food chain, or for use to create useful material. We thought of the direct food value of plants when, at the height of the pandemic, there was talk of food shortages and we looked out over the fields at all the prickly pear cactus and decided we would not go hungry if the local supermarket went short of vegetables.

Our Hill Country crop of prickly pear cactus (Opuntia Lindheimeri) is front and center when it comes to food value.  Named after Ferdinand Lindheimer who documented the species, its common names are Lindheimer prickly pear and nopal prickly pear.  It was adopted as the Texas State Plant in 1995 and House Concurrent Resolution No. 44 describes it as “rugged, versatile, and uniquely beautiful. The prickly pear cactus has made numerous contributions to the landscape, cuisine and character of the Lone Star State and thus it is singularly qualified to represent the indomitable and proud Texas spirit.”

The plant blooms April through June with flowers of yellow, orange or red and may turn from yellow to orange as it ages.  In rare cases white flowers have been noted.

32-1 Prickly Pear cactus  Opuntia Lindheimerii  

The prickly pear cactus plant occurs naturally in the Americas but has been exported to other parts of the world. In Mexico, species of Prickly Pear cactus plant are found in large quantities in the western and central regions. It can also be found on dry hills of the east coast from Florida to Connecticut and surprisingly, it also occurs in isolated areas of southern Ontario.

All species of Opuntia have fleshy flat pads or paddles which look like large leaves but they are not leaves but modified branches and stems which serve many functions such as production of flowers, photosynthesis and water storage. Its spines are covered with tiny pointed hairs which are known as Glochids. All of which are found at the base of the major spines. The big spines look formidable, but the little glochids are the more bothersome as one touch of them puts many small spines in your skin.

This plant contains pectin, which is helpful in treating many diseases. It also  has antioxidant properties, so it is part of a healthy diet. The edible parts of Opuntia are its newly formed stems (the pads) the fruits, and flowers.

32-2 Prickly pear nopalitos

The new growth of stems (again, the pads) are cleaned of spines and sliced thin in such a manner that the cut material appears like string beans.   As they are cut a noticeable slimy substance appears and will disappear after blanching , cooking for 15 minutes and rinsing in a colander. They can then be sautéed with butter, salt, garlic and cilantro and served just as you would any vegetable.  We have tried them prepared this way in Chicharron y Nopal a recipe like pork stew.   In case you care to try this, the spines are cleaned off the pad with a sharp paring knife or a spoon held at a 90 degree angle and used in a scraping motion and about ¼ “ of the pad’s edge is removed all the way around to get rid of the remaining spines. When sliced in long strips and cut into pieces that look like green beans, they are called nopalitos. The fruit is useful as well, is tastier than the pads, and can be used in a variety of ways.  The wild animals have discovered this part of the cactus and so raccoons and deer will probably beat you to them for their dinner.  The fruit is commonly called “tuna” and forms at the base of the flower. Perhaps the most favorite use of the tuna is to make jelly, jam or candy.  The fruit is cleaned of spines, boiled to cook the fruit to a fine pulp, strained, and after adding pectin and sugar is bottled up in sterilized jars.  There are recipes for making these jams and jellies on the web. 

32-3 Prickly pear with red-ripe tunas

The time to harvest the tunas is when the tunas are dark red as they are in the picture above.  An entrepreneurial former teacher in Tucson, Arizona has made a business of using Sonoran Desert plants to make some of these products and also gives lectures to the community about the plants and their uses plus lending her support to a couple of local charities.  On BalconyContainerGardening.com you can find a recipe for Cactus Candy.  And if you don’t want to try doing it yourself see below for Cheri’s boxed specialty.

32-4  Prickly pear candy

There are many advocates for eating the prickly pear flowers in a salad, but we prefer to look at them in the field.

Before leaving the prickly pear there was a nagging need to follow up on how ranchers use the plant for feeding their cows during droughts.  The Internet produced several interesting posts in answer to one woman living with her family, 1 heifer, 2 dogs, 2 hogs and 1 rather nasty chicken named Bruce on 6 acres in a near desert situation with little forage.  However she wanted to use the available prickly pear plants, if possible.

And the answers flowed in.  “Yes they can be eaten but be sure they are hand-picked and the spines are all cleaned off.” 

“DH says that’s what ‘pear burners’ are for, propane torches to burn off the spines.”  

“We feed it to the cows and pigs after it’s been burned and now, we’ve begun planting thornless prickly pear.” 

“One time, Loretta (the cow) was impatient for us to burn and came in with a swollen mouth full of spines.  I called my dad (old cowboy) and he said don’t worry cows have some sort of enzyme in their body that dissolves thorns, just feed her as usual.  We did and when she was finished feeding, she had no thorns left.  So I say go ahead and burn the spines off as they will like them better, but no worries.  Cactus is very healthy for them and they will break down the fences for freshly toasted/roasted cactus.” 

“Nopale water is a favorite of my cows in high summer temps.  I’ll chop a few pieces and soak them until it gets slimy (but not fermented).  They love it.  If you add enough cactus you can use half the water and refill it again making your original batch last longer.  Also, a bit of info off subject that’s come in handy for us.  Nopale slime is a great mortar.  If you mix it into a sharp sand slurry it’ll dry harder than concrete and is water resistant.”

32-5  A cow chowing down on a toasted/roasted cactus pad

Another interesting small cactus that exists here in BWR is the Echinocereus Reichenbachii  named after German botanist H.L.G. Reichenbach and known familiarly as Lace Cactus here in the Hill Country where it grows on our limestone hills. 

32-6  Lace Cactus

This is a nice double one on a piece of limestone not too far from our house.  Three similar varieties range from the Texas Panhandle to Oklahoma, S.E. Colorado and New Mexico. They bloom in the spring and make colorful additions to the landscape.  Also as our builder pointed out, they replant easily and make nice indoor gifts planted in a small, attractive limestone rock with a generous depression for soil.

Another cactus that’s used in landscaping and is useful as well is the Twisted Leaf yucca.  It’s the most common yucca in the Hill Country and is identified by its long twisted leaves that radiate out from a central point near the ground.  After being soaked, pounded and stripped the long fibers in the leaves may be braided or twisted and used for making into ropes, baskets, mats or shoe soles.  If one is into survival skills, there are many Internet videos showing exactly how to master this art.  It was a very important plant for Ancestral Pueblo people because of its diverse uses.  The roots contain saponin that can be used as a soap substitute or shampoo.  According to legend, shampooing the hair with yucca makes the hair strands stronger and may prevent baldness.  There are shampoos available for purchase these days and DIYers are happily sharing their recipes and experiences with making it themselves.

32-7  Twisted leaf yucca

These beautiful yuccas came with the property, but it wasn’t until we added the fence that we ever saw the flowers.  Like squash blossoms, they are deer candy.  The nicest stand we’ve seen blooming locally is on a steep hill on the left as RR 12 descends down toward Wimberley.  Just after it is the antique shop on the right.  Many of the tall stems can still be seen above the foliage, but of course the flowers are long gone at this time of the year.

Continuing to stick with spiny plants we come to the Agarita (Berberis trifoliata) another common plant on our dry, rocky soil. 

 

32-8  Agarita bush in September without flowers or berries

This is a lovely bluish-gray-green bush that can grow to 8’x 8’.  It is evergreen with compound leaves consisting of 3 leaflets with 5 sharp points.  It blooms Feb.-Apr. with fragrant yellow flowers that are followed by red berries in June.  The bush is a favorite pollen source for bees and nesting site and haunt for birds and small mammals who eat the berries as the thorns keep cattle and deer away. 

The bright red berries also make good jelly, but because of the thorns they are not picked like other berries.  Instead a sheet is laid on the ground and the berry-laden limbs are beaten with a stick to save the jelly-maker from any lacerations.  Agarita jelly  Follow the link to see how to produce the product below.

32-9  Agarita jelly

The wood of the agarita is also useful.  A bright yellow color, it can be used to make a tan-orange dye.  According to Jan Wrede[1] “The roots contain an alkaloid that is toxic to bacteria and protozoans and has been used to treat toothache and stomach trouble.”

Lastly, we cannot leave the subject of useful plants without mentioning the Mustang grape.  We had lots of grapes this year, but once again we let the time slip by when they were a beautiful green and the size was perfect for making green-grape pie.  Later they were ripening into a nice plump purple when the heat and drought descended along with a loss of desire on our part to hassle them out of the trees, cook them up and make jam.  They do make good jam and next year’s crop will be here before you know it.  If you want to get an idea of what the process involves, you probably can’t do better than to take a look at retired electrical engineer Sawdust Willy’s tutorial. Mustang grape jelly 

Another grape we’ve purchased and planted is the Black Spanish or Lenoir variety.  We only have a couple of vines at the end of the back porch and this year (their 3^rd) they made nice little clusters.  A small grape, resistant to Pierce’s disease, they are used to make wine, juice and jelly.  They have a few large seeds which only seem to intensify the mockingbirds’ enjoyment and we have enjoyed watching the mockingbirds consume them.

Since this has been a newsletter about useful plants and in many cases the food to be made from them it seems apropos to finish up with the end of the story on tatume squash.  The crop was finished by the end of August, all the squash were picked.  They felt hard to the touch, but R was sure of their viability, D was not so sure.  On the day when R took the knife to one of them, he was justified and D was happily surprised.

32-10  Tatume squash and cut "rings"

The rings were cut into small chunks and used in a friend’s recipe for Zucchini Florentine.  Sliced, cooked chicken was added and dinner was plated with the addition of half a small baguette.

32-11  Tatume/ Chicken Florentine

We are saving tatume seeds and if any of you would like to try growing the squash let us know and we’ll get you some seeds.

Sightings

32-12  Prairie Tea (Croton monanthogynus Michx)

Also known as One-seeded croton and Lemon spurge, this silver-gray-green weed is apparent everywhere in the fields at this time.  It is a favored forb of the Texas bobwhites.[2]

---

[1] Trees, Shrubs and Vines of the Texas Hill Country

[2] Texas Bobwhites A Guide to Their Foods and Habitat Management by John A Larson, Timothy E. Fulbright, etal.

Commemorative Air Force

When a good idea meets a lot of enthusiastic people, it takes off like a plane.  And so it was when Lloyd Nolen and a small group of ex air force service pilots pooled their money and bought a P-51 Mustang to enjoy the restoration and flying of this old plane. That was 1957 in the Rio Grande Valley area of Texas and the plane at that time was not all that old, but it still needed restoration.

Figure 31.1   P-51 Mustang

This group was so enthused with  their work on the P-51 they then searched for other aircraft to add to their collection.  In the early 1960s they found and bought two F8F Bearcats and added them  to their assemblage. 

Figure 31.2 F8 Bearcat

That’s when they decided they were on a mission to collect, preserve, and thereby celebrate the history of old aircraft and the men and women who served the Air Force.  They named their organization the Confederate Air Force and then renamed it the Commemorative Air Force (CAF) 20 years ago when it became apparent that there was nationwide and worldwide interest in their efforts. 

Today, there are several units of the CAF across our nation that own, maintain, and fly 173 different aircraft.

Below is a map of the units (wings) of the CAF:

Figure 31.3  Units of the Commemorative Air Force.

Throughout the year various units of the CAF participate in events that introduce the organization and the aircraft to the public as a means of keeping the interest in the history of these vintage aircraft alive and to generate cash to maintain and fly the planes.  There is no payroll as the members are all volunteers.

And the good news is that we have at our San Marcos Airport the Central Texas Wing of the CAF.  Its base is in the hangar building at the end of the road near the air terminal.

The Central Texas Wing is the proud home of these five aircraft:

B-25 MITCHELL “YELLOW ROSE”

 

Figure 31.4  “Yellow Rose”

The “Yellow Rose”, the christened name of the vintage B-25J Mitchell WWII bomber, is flying again. The bomber is completely restored to its wartime capabilities and is operated by the Commemorative Air Force Central Texas Wing. It is one of the flying museum pieces belonging to the organization’s “Ghost Squadron” aircraft collection. It took four years to restore the aircraft to WWII condition by members of the Central Texas Wing. It was donated to the CAF in 1981. Thousands of man hours were devoted to this aircraft over the four-year period by the members of the Yellow Rose Squadron to bring the Rose back into full operational readiness.

 

 

 

P-39 AIRACOBRA “MISS CONNIE” 

Figure 31.5  “Miss Connie”

The Bell P-39 Airacobra was one of the principal American fighter aircraft in service when the United States entered World War II. The P-39 was used by the Soviet Air Force and enabled individual Soviet pilots to collect the highest number of kills attributed to any U.S. fighter type flown by any air force in any conflict.

Other major users of the type included the Free French, the Royal Air Force, the United States Army Air Forces, and the Italian Co-Belligerent Air Force. Designed by Bell Aircraft, it had an innovative layout, with the engine installed in the center fuselage, behind the pilot, and driving a tractor propeller with a long shaft. It was also the first fighter fitted with a tricycle landing gear. Although its mid-engine placement was innovative, the P-39 design was handicapped by the absence of an efficient turbo charger preventing it from performing high-altitude work. For this reason, it was rejected by the RAF for use over western Europe but adopted by the USSR, where most air combat took place at medium and lower altitudes.

 

C-310/U-3 

Figure 31.6  U-3A[RT1] 

The U-3A began life as the Cessna model 310A (which had gained fame as the “Songbird” flown by Skyler “Sky” King of radio and TV fame) in January of 1953. The USAF decided it would make an excellent replacement for its fleet of aging Beech C-45s in the administrative support, liaison, and light cargo duties. Built as a four or five passenger fast executive transport, 546 U-3As were accepted by the United States Air Force. Originally designed as L-27As, the U-3A served as an executive transport, liaison aircraft and performed as chase planes in several units that operated the U-2.

 AT-6 “Texan”

Figure 31.7  AT-6 Texan in 1943 photo

The AT-6 Texan is an American Pratt and Whitney Wasp powered trainer aircraft used to train our pilots and the air crews of our allies during World War II, Designed by North American Aviation, the T-6 is known by a variety of designations depending on the model and operating air force. The United States Army Air Corps (USAAC) and USAAF designated it as the AT-6, the United States Navy the SNJ, and British Commonwealth Air Forces the Harvard, the name by which it is best known outside the United States. Starting in 1948, the new United States Air Force (USAF) designated it the T-6, with the USN following in 1962. A total of 15,495 T-6s of all variants were built and more than 125,000 air crew were trained with this aircraft.[1]

  

C-45 EXPeDITOR “LONE STAR LADY” 

Figure 31.8   "Lone Star Lady"

The C-45 was developed based on the Beech Aircraft Corporation’s Model 18 “Twin Beech “series. First flight for the original company design was recorded on January 15th, 1937 and the aircraft was introduced that same year. The US military adopted the Model 18 in many guises including the United States Army Air Forces (USAAF) designated the “C-45”. It went on to become a fixture within the inventories of the USAAF (later the USAF), the US Navy and the USMC and saw additional service overseas with British and Canadian forces through Lend-Lease. In all, some 9,000 C-45s were built in a span of years from 1937 to 1970.

 C-47 SKYTRAIN “THAT'S ALL, BROTHER” 

 

Figure 31.9  "That’s All, Brother" file photo

Below, the very plane you see here in this file photo and parked at the San Marcos Airport was the lead aircraft on the D-Day invasion in Normandy, France on June 6, 1944. This aircraft was recently pulled out of the hangar at San Marcos and the engines were run to get all the parts oiled up and ready to go for the next time in the air.  Here it is sitting on the concrete at the hangar pad last month.

Figure 31.10   That's all, Brother at San Marcos

Piloted by Lt. Col. John Donaldson, it led over 800 C-47s that dropped over 13,000 paratroopers in Normandy, France on D-Day.

After the war in 1945 the plane was sold to the civilian market and had many owners over many years during which its historical significance was lost.  Then two historians from the USAF found it being sold for scrap metal in Wisconsin.  It was brought to the attention of the Commemorative Air Force which was able to acquire the plane, and through a large group of donors and volunteers restore the plane accurately to 1944 specifications and flying status.  It can be experienced by taking a tour or going on a flight.

In 2019 The Central Texas Wing of the CAF flew That’s All, Brother with 14 other C-47/DC-3s to make the epic journey back over the Atlantic to celebrate the 75^th anniversary of D-Day and commemorate all the Great Ones who had been involved.  They retraced the classic air ferry path from the U.S. to Canada, Greenland, Iceland, Scotland, and England to join up with over 30 C-47/DC-3s in Duxford, England.  On June 5, That’s All, Brother flew, with 18 re-enactor paratroops who boarded the plane in England, over the English Channel, and made a successful paradrop flight over Normandy.  On June 6, That’s All, Brother  flew with 12 other C-47/DC-3s in formation to close out the D-Day commemoration over the U.S. cemetery in Normandy, and then continued to Germany for the 70^th commemoration of the Berlin Airlift and back to France for the Paris Air Show.  It was, to those who took part, a very memorable experience.  .  To see a video of that trip go to:      D-Day

The hanger at the San Marcos Airport is a city landmark and is part of the museum housing the 8 aircraft assigned to the CAF Central Texas Wing as well as a WWII Jeep, a 1916 Republic truck, an A-4 and a C-47 cockpit open to visitors.  The museum also has exhibits in the 3,000- volume library and Officers’ Club plus the main 5 rooms dedicated to aviation through all eras but primarily WWII.

Room 1 displays exhibits of WWI and Modern aviation.

Figure 31. 11 Museum Room 1

Room 2 exhibits consist of the European Theater and weapons from all areas of WWII.  There are also exhibits dedicated to the Tuskegee Airmen, Germany, Russia, N. Africa, and D-Day. 

Figure 21.12 WAC Display

Of special interest to us was the WAC poster as each of us had an aunt who served as a WAC.  One served as a driver in England and France the other ferried returning wounded soldiers by truck from the army airbase in Ogden, Utah to the hospital. 

Figure 31.13 Jacqueline Cochran

The story of Jacqueline Cochran and the formation of the WASPS is also interesting.[2]

By September of 1942 pilots were desperately needed to ferry planes from the factories to embarkations and to training bases.  Twenty- eight women with 500 hours of flying experience were accepted and based in Delaware under the Air Transport Command.  About that same time Jacqueline Cochran offered to organize a group of women pilots with less experience (200 hrs.) than the WAFs. who were funded by Civil Service.  Her offer was accepted and in June 1943 the name was changed to Women’s Airforce Service Pilots (WASP) with Jacqueline Cochran as Director.  The WAFS were included with Nancy Love remaining as Commander of the Ferrying Service. More than 25,000 women from all over the U.S., Canada, England and Brazil applied but only U.S. citizens were accepted.  Of those 1,830 were acknowledged and 1,074 achieved their wings.

One of those women was Bernice “Bee” Falk.  She was born in 1920 into an industrious family involved in merchandising where the women enjoyed the freedom to work and help earn money to benefit their families.  Because of the Depression, Bee was unable to attend college.  Instead she took secretarial classes in high school in preparation for finding a job and ended up as a private secretary to the patent attorney for Conmar, a company producing zippers for the war effort in Newark, N.J.  However, feeling bad about not going to college, she looked into night classes and was amazed to find courses in aeronautics.  Realizing that aviation was here to stay and wanting to do something more for the war effort she decided to enroll in 1943 at the Newark College of Engineering.  It wasn’t long before she and a few of her classmates were inspired to sign up at their instructor’s flight school where they began spending weekends and vacations learning to fly some of his acquired Taylorcrafts.  The Taylorcraft featured side-by-side seating and 65 horsepower. It had to be started by hand, pulling the propeller.

Figure 31.14  Taylorcraft trainer

Bee was one of six taking flight lessons who applied and were accepted in the WASP class of 44-7.  She graduated on September 8, 1944 and began her first assignment at Pecos Air Force Base, Pecos, Texas testing trainer A-17s that had been repaired. 

Figure 31.15 A-17 also known as UC-78

The WASP group was disbanded on December 20, 1944 and the women entered civilian life.  Bee finally started Garden State Airways, ferrying new light planes from manufacturers to dealers and became a dealer herself and never lost her love of flying.

Continuing with Room 3 of the museum we find airborne cameras and their products, survival gear and memorabilia from Korea, China, Burma and India.

Figure 31.16  Museum Room 3

Museum room 4 includes the San Marcos Army Navigational School, Pearl Harbor, the Aleutian Islands and Viet Nam while Room 5 is dedicated to the Dolittle Raid and Japanese war memorabilia.

Every time we stop by there, we learn something new as we look around the museum and chat with the volunteers.  And we’re drawn to the back porch whenever we hear the easily recognized sounds of the motors of those old planes as they pass near BWR.  Long may they continue to fly!

-----------------SIGHTINGS--------------------

At 7:30 am on the 26^th of July as R was walking back to the house with the Daily Record, he spotted the following and rushed in the back door hollering, “Look out back!”  I replied, “I am, I see  the deer.”  “No, higher!”  It was beautiful!

Figure 31.17  Rainbow left side, enlarged

The left side was right in the back yard minus the pot of gold.  It must have been at the end of the right side over toward the Castles. Too bad we didn’t realize at the time that our new phones would have enabled us to take a panoramic photo.  Dang!

Figure 31.18 Rainbow Right side

But then we stitched the left side photo and the right side photo together.

Figure 31.19 Full rainbow on 26 July 2020

In this picture you can see the rainbow was double at times.  What a nice start to a Sunday morning, hope some of you caught it as well.

Our other bit of information is a non- sighting as the Painted Buntings have departed.

---

[1] This is the plane the WASP (Women Airforce Service Pilots) trained on.  More about them later.

[2]Plus a Book titled Letters Home 1944-1945 Women Airforce Service Pilots by Bernice “Bee” Falk Haydu

---

 [RT1]